See What In Wall Fireplace Tricks The Celebs Are Utilizing

In Wall Fireplace – How to Choose the Right Height and Depth for Your Fireplace

An in-wall fireplace gives an elegant and polished look without the expense of mantles. It is among the easiest electric fireplaces to set up.

There are a few things to think about before purchasing an in-wall fireplace. To make the most of your investment, consider these tips for a successful purchase:.

Height

While it may appear to be an easy task, figuring out the height of your new fireplace is among the most important decisions to make. The height of your fireplace can influence everything from how it will fit into a space to its visibility. Having your fireplace raised too high could look odd and detract from the aesthetics of the piece. On the other side having your fireplace too low could make it appear unattractive in the wall space.

Electric fireplaces can be placed at various levels. The majority of people place their fireplaces in a seated position at eye level. This typically requires a height of between 40 and 42 inches from the floor to the bottom of the fireplace. Some people place their fireplaces under their TVs, which is visually appealing.

The height of your fireplace depends on several factors such as the length and size of the wall you intend to put it on. The bigger the room, the larger it can be. This could mean that you’re able to fit a larger fireplace into it. This is also true for the length of the wall because a wall that is longer can accommodate a fireplace that is larger.

Another important factor to consider is how you intend to make use of your fireplace. If you are planning to use it only to decorate your home, a lower height is best. If you want to use it to heat your home it is necessary to make sure that the fireplace is tall and sturdy enough to meet safety standards.

Having the proper height for your fireplace will allow you to make sure that it’s in keeping with the decor and is easy to work on when cleaning or filling it. If you’re not sure of the height to go with it is always a good idea to seek out a professional fireplace installer for assistance. They’ll be able to determine the best height for your fireplace based on their experience and your unique home.

Depth

The depth of a fireplace is crucial to consider if you intend to install it in a recessed position. If you’re planning to cut into the wall, ensure that you have enough space to accommodate the fireplace’s internal design (the space for the smoke shelf above the firebox as well as the flue that is atop the roof). Also consider the space you will have for the surround, and whether or not you’d like a mantle.

Many of the latest electric models of fireplaces have the depth of being almost hidden, giving them a “built-in” look. This kind of wall fireplace made from electric is best demonstrated by the Panorama BI Deep series. The model is 5.8-inch depth that lets viewers to see the flames, ember bed, and not the frame. The media package includes driftwood logs with natural looks white pebbles, or clear glass crystals that add a luster to the embers and reflect the flames.

Gas wall-mounted fire places are also available in shallow and deep models. When deciding on the depth of your fireplace it is crucial to remember that these fireplaces function as a supplemental heat source and should be properly vented by a skilled professional. The length of the vent pipe, the size of the flue and the distance between the stove and the vent are all elements that need to be considered when determining the depth of a gas fireplace.

It is important to read and adhere to the instructions of the manufacturer before installing your fireplace. In most instances, hiring a professional to install your fireplace is highly recommended. Also, it is always best to have an extra person in the event of installing gas fireplaces.

Installing a fireplace in the wall of your home could be an ideal way to increase its value and also add ambiance to your living spaces. It can also reduce the cost of heating. Furthermore, it’s an excellent option if you aren’t able to install an old-fashioned fireplace into your home because of space constraints or due to the location of an existing chimney.

Surface Mount

If you’re unable, or prefer not to cut through your wall or construct a space to accommodate an electric fireplace A surface mount can give you a sleek and modern look. Some models, such as the Allusion line of electric fireplaces, can be mounted partially recessed into a wall, without compromising heat output.

To begin the installation start by marking the wall using a pencil where the bracket will be installed. Use a stud-finder to locate the studs and then place each bracket in front at least one stud to ensure stability. If a stud is not accessible or isn’t suitable for your fireplace, use anchors for the drywall to help support the mounting bracket.

After you’ve marked the position of the brackets to be mounted and drilled them, screw them into the wall, ensuring they are properly aligned with the studs. If you can, secure each bracket to a stud to ensure security and strength, but you could also use plastic anchors if necessary. Once the mounting brackets are installed, lift the fireplace and hang it from the bracket. Once the fireplace is installed ensure that it is level.

Before continuing with the installation, connect your fireplace and make sure that all features are working correctly – turn on the fire and light up the flames, play around with the heat, ember bed lights, etc. Once you are satisfied with the results it is time to put in the floating mantel.

Based on the model of your fireplace It is possible to connect the wire connection to the appliance connector on the bottom of the mantel, or if it has slots or hooks, connect them to slots on the brackets for mounting. Once you’ve done that then, refer to the owner’s manual to find specific instructions on removing the front glass panel and inserting it inside the opening.

Once you’ve removed your front panel of your fireplace and inserted it in its opening, follow the guideline to complete the installation by replacing the glass front and adjusting the height as needed. If your fireplace includes ember bed media, place it over the top of the grille to create a natural look. Secure it using the included screws.

Plug-In

In contrast to traditional fireplaces that burn wood, electric fireplaces don’t require vents or chimneys. Connected to a standard outlet, they can provide additional heat to rooms up 400 square feet. You can also adjust the atmosphere with different flame and heat settings. Certain models come with LED lighting effects to highlight the flame and embers. Others include a top grille grate that hides manual controls but easily opens to reveal buttons for your preferred setting.

electric firesuite fireplaces with plug-ins can be hung directly on walls or installed into the wall for an aesthetically pleasing look. These fireplaces are usually simpler to install than a mantel fireplace. Some models come with a pedestal to allow you to put the fireplace on flat surfaces, such as a buffet or dresser. A remote control as well as mounting hardware and a log set are also included. These electric fireplaces can include both heat and flame options, which can be turned off to provide a warm and cozy atmosphere.

Some models have adjustable privacy glass that can instantly change from completely transparent to partially. These types are ideal for walls that divide zones of entertainment such as dining and living rooms. They can also be utilized in bedrooms where the addition of a new fireplace can be a cost-effective method to cool an area without compromising privacy.

Plug-in electric fire places don’t require hardwiring, but they should be mounted on an area that is able to support their weight. Some models come with a kit which includes an already wired cord and special bracket that makes the installation process easier. This kit is suitable for concrete or drywall installation.

When deciding where to put your wall mount electric fireplace, ensure that it’s near an electrical outlet. Plug-in electric fire places can be connected to outlets on the same circuit as the electric fireplace or into a designated outlet. It’s best to use a dedicated circuit so that nothing else in your home will be operating on the same voltage and possibly trip your breakers.